LBS Catalog

2” Depth of Cut

High Speed Steel Fractional

Packaging: All sizes are individually packaged.

Series 9200SE Annular Cutters continued

1-1/4” Shank

Broach cutting using Drillco cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration, and less thrust. Rather than drilling out the metal with a solid drill, Drillco cutters remove only the periphery of the hole, ejecting a slug at the end of the cut. Tests show that a solid drill will take 3 minutes, 45 seconds to drill a 1-1/4” hole in 3/4” plate. A Drillco cutter can do the same job in 35 seconds. The Nitro ranges of Annular Cutters are made from Cobalt, offering even better performance over the standard High Speed Steel ranges.

Cutting Tools

9200SE

HSS 9200SE Item No.

HSS 9200SE Item No.

Size

Size

2-5/16” 20653 2-3/8” 20654 2-7/16” 20655 2-1/2” 20656 2-9/16” 20657 2-5/8” 20658 2-11/16” 20659 2-3/4” 20660 2-13/16” 20661 2-7/8” 20662 2-15/16” 20663 3” 20664 3-1/16” 20665 3-1/8” 20666

3-3/16” 20667 3-1/4” 20668 3-5/16” 20669 3-3/8” 20670 3-7/16” 20671 3-1/2” 20672 3-9/16” 20673 3-5/8” 20674 3-11/16” 20675 3-3/4” 20676 3-13/16” 20677 3-7/8” 20678 3-15/16” 20679 4” 20680

Assortments A-12 Fasteners F-72

Description

Item No.

Cutting Tools C-325

Annular Cutter Pilot

Pipe Fittings P-541 Electrical E-704 Hydraulics H-745

2” depth of cut pilot pin for 2-5/16” & larger sizes

20622

Abrasives AB-782 MRO M-833

Tel: (225) 272-6200 Fax: (225) 272-7001

sales@lbsbr.com www.lightningboltandsupply.com

C-499